How much area heating can a 400 MW gas-fired hot water boiler meet?

2022-03-23 14:30:52

A 400 megawatt (about 0.55 ton) gas-fired hot water boiler can satisfy a heating area of ​​5,500 square meters.

The gas-fired hot water boiler has a high degree of automation and no noise during operation, which greatly reduces human and material resources and becomes the mainstream equipment for heating. So, how much area of ​​heating can a gas-fired hot water boiler meet?

Generally speaking, a 1 ton gas hot water boiler can heat about 6000-8000 square meters.

The commonly used calculation formula is: hot water boiler load D MW = T*S/215000, where T is the indoor and outdoor temperature difference, S is the heating area, and 215000 is the set heating equivalent.

Of course, the detailed parameters also need to refer to other factors.

Factors that affect the heating area of ​​gas-fired hot water boilers include altitude, building height, thermal insulation of building materials, and air circulation in heating places.

Altitude: The higher the altitude, the lower the temperature, which is common knowledge of geography. For the same heating area, the boiler equipment in high-altitude areas will definitely have a larger capacity than those in low-altitude areas.

Building height: 25 meters belongs to a stage. When the floor height is higher than 25 meters, the pump head during boiler heating should be considered, which will also affect the heating area that the boiler can meet to a certain extent.

Thermal insulation of building materials: Nowadays, many high-rise buildings will add thermal insulation materials to improve the overall thermal insulation performance of the building during the construction process; however, there are also many houses that have lived for a long time without thermal insulation treatment, so the heat dissipation will be faster, and the boiler capacity will also need to be Choose bigger.

Air circulation in the heating place: Heating places with ventilation on all sides will definitely require more heat than airtight places such as greenhouses.

After more than 20 years of technical precipitation and exploration, combined with domestic and foreign advanced technology and its own research and development achievements, the 1-ton gas-fired hot water boiler produced by Fangkuai Boiler Co., Ltd. can meet the heating area of ​​10,000 square meters. From this, it can be inferred that a 400 megawatt (about 0.55 ton) gas-fired hot water boiler can satisfy a heating area of ​​5,500 square meters.

*
*

Global Service Network

Based on the strategy of "localization service", FANGKUAI has set over 30 overseas offices. If you have any questions, you can make connections with nearby office directly. FANGKUAI will offer you solutions to your problems quickly.

More

Google Street View

Global marketing networks and overseas offices connect FANGKUAI with users tightly so that we can offer more timely services to our customers.

More

Back
Top
Close